Meet Roccar handheld bidet sprayer, experience an incredible new life General T-Valve for most Canada water supply connecting. The nozzle can be mounted to the wall or hung with the toilet water tank. Installation Instruction Both connectors are of the same size, but the hexagon nut is connected to the water distributor and the other connector is connected to the faucet. We have changed the material of the hose from rubber to Nylon,which wears resistance and good toughness. Thank you for your support,your trust means a lot for our shop. NOTE: Test the bidet sprayer and t-valve for leaks. if leaking occurs around any of the nuts, turn off the water and tighten the leaking nut turn.Repeat this step until the leaking stops. If leaking continues, unscrew the nut and check the washer to make sure it is seated flat and even in the bottom of the nut. STEP 1: TURN OFF THE WATER SUPPLY Turn OFF the water supply valve at the wall next to your toilet. Twist it clockwise as far as it will go. Flush the toilet and hold down the handle to completely empty the toilet tank. STEP 2: MAKE SURE THERE IS A RUBBER WASHER INSIDE BOTH THE FEMALE ENDS Confirm that the flat rubber washer is inside the top of your bidet’s T-valve (hint: the top of the T-valve is where the spinning nut is located), and it is pushed all the way down to tighten the connection. STEP 3: CONNECT THE T-VALVE AND THE HOSES Screw the top of the T-valve onto the toilet’s fill valve where you just unscrewed the water supply hose. Be careful not to over-tighten the connections. Screw the toilet’s water supply hose to the bottom of the T-valve. Connect one end of the handheld bidet hose to the side of the T-valve. Screw the bidet sprayer head onto the other end of the bidet hose. IMPORTANT: Please turn off the Shut-off Adapter (T-Valve) after each use. because if you don't turn it off,There is risk of weakening the internal components and over time, It may cause flooding or water damage. STEP 4: TURN ON THE WATER SUPPLY & MOUNT THE SPRAYER Turn the water supply valve back on. If you notice that any connection is loose or leaking, you may need to add some plumber’s tape. If you’re leak-free, your hand-held bidet sprayer is installed and ready for use! Toilet Mount: Screw the holder onto the toilet tank clip. Lift up the toilet tank lid, slide the clip onto the side of the tank, and replace the lid. Better Hygiene Cleaning An ideal choice meet the children / the old needs, especially during pregnancy and menstrual cycles.Moreover, It can relieve the pain of hemorrhoids and reduce infection. Better Pets Shower The pet clean sprayer can provide suitable water pressure for helping you easily thoroughly clean your pet, even needn't be troubled with thick and long hair.It'll become a happy and relaxing thing to shower for your lovely pets Better Toilet Cleaning Using the upgraded sprayer, you will find it is easy to clean the stinky toilet.Push the switch, and you can use a toilet brush simultaneously. It'll immediately become fresh. Renew a tidy and comfortable home for you!